Friden SRW Keyboard

The Keyboard

Control keys near the large keyboard included:

Plus (+)

Added the amount in the keyboard to the upper dials.

Minus (-)

Subtracted the amount in the keyboard from the upper dials.

Two Divide Keys (both labeled identically)

Both keys were pressed together to divide. Why? Apparently because Friden's chief competitor managed to get a patent on a single key divide.

Left and Right Shift keys (<O O>)

Shifted the carriage left and right.

Square Root keys - 11 of them

There were 11 keys at the base of the main keyboard. These allowed the user to specify the location of the decimal point (since the roots 25 and 250 don't have the same digits) and start the square root process.

Add Key (ADD)

Determined whether the keyboard was cleared after an operation. With the key in the up position, it was necessary to press the Keyboard Clear key to clear the keyboard. Otherwise, the keyboard was cleared on each addition.

Keyboard Clear (KB CLEAR)

Cleared the large keyboard.

Carriage Clear (CARR CLEAR)

Cleared the registers in the carriage and returned the carriage to position 1.

Keyboard Lock (KB LOCK)

Locked the entire keyboard. Also prevented entry of keyboard value into upper register when using the Enter Dividend key.

Enter Dividend (ENTER DIVD)

Cleared the registers, set the carriage to a predefined position and entered the dividend in the upper dials. Also prevented the 1 from appearing in the counter as it would during a normal add. Finally, it cleared the keyboard for entry of the divisor.

Division Stop (DIV STOP)

Stopped a division in progress. Handy after accidentally asking the machine to divide by zero which would otherwise run forever.

Control keys near the smaller multiply keyboard included:

Multiply (MULT)

Cleared the multiply display, performed the multiplication and cleared the keyboard.

Accumulate Multiply (ACCUM MULT)

performed a multiplication in which the product and multiplier added to the products and multipliers already in the registers. Then cleared the keyboard.

Negative Multiply (NEG MULT)

Like a accumulate multiply but it subtracted the product and multipliers.

Multiplier Repeat (REP)

Locked the multiplier in the register so it could be reused.

Multiplier Clear (MULT CLEAR)

Cleared the multiplier register.

Non-Entrey (NON ENT)

Prevented the entry of multipliers into the lower carriage register.

Counter Control (CTR CON)

Reversed the sense of the counter (the lower carriage register.) (i.e. additions would now decrement the counter.)

Back to early models contents
Back to the Friden SRW